Are Talaria frames interchangeable between models?

Generally no. Frames, mounts and pivot hardware differ across the range and between model years, and battery box dimensions differ too. Check fitment against your exact model and year before ordering anything structural.

How do I know if my frame bearings are worn?

Put the bike on a stand. Rock the forks fore and aft with the front brake on — knocking at the headstock means headset bearings. Grab the rear wheel and push side to side — movement at the swingarm means pivot bearings. Both are straightforward jobs.

Can a cracked frame be repaired?

We would not ride one. Aluminium frames can be welded, but heat changes the temper around the repair and these machines put real load through the swingarm pivot area. On a used bike, a welded frame is a reason to walk away rather than negotiate.

Talaria parts

Talaria frame parts, guards & fixings

The frame is what everything else hangs off, and it is the one area where a cheap part is a genuinely bad idea. Vibration loosens fixings and instant torque works bearings hard — both are maintenance items on these machines, not fit-and-forget.

What to know about Talaria frame parts

Check torque regularly. Vibration loosens fasteners far faster than on a gas bike, because there is no engine mass damping it. Going round the frame bolts with a torque wrench after the first few rides, and periodically after that, prevents most of the problems on this page.
Bearings are a service item. Headset, swingarm and linkage bearings all wear. Play at the headstock or a swingarm that moves side to side means bearings rather than something worse — replace them as a set rather than one at a time.
Guards earn their money. Frame and motor guards cost a fraction of the parts they protect. On rocky terrain they are the cheapest insurance available.
Crash damage is not always obvious. Look for rippled paint behind the headstock and around the swingarm pivot. Those are the two areas where a hard impact shows first, and both are walk-away territory on a used bike.

Talaria frame parts we stock

BLT836 Motor Controller Bolt With Washers for TL3000, TL45, TL4000 $1.14
BLT855 Bolt M8 x 45mm $1.14
BLT886 Pulley Bolt M6 x 14mm $1.14
BLT887 Pulley Bolt M5 x 20mm $1.14
BLT1010 Bolt M6 x 14mm $2.29
BLT1011 Bolt M6 x 16mm $2.29
BLT1018 Bolt M6 x 10mm $2.29
BLT1017 Bolt M5 x 10mm $2.29
BLT1020 Bolt M6 x 10mm $2.29
BLT1021 Bolt M8 x 12mm $2.29
BLT1023 Bolt M6 x 12mm $2.29
BLT1046 Bolt M5 x 16mm $2.29
BLT1061 Bolt M5 x 8mm $2.29
BLT803 Bolt M8 x 18mm $2.29
BLT804 Bolt DIN M8 x 25mm $2.29
BLT833 Rear Brake Disc Bolt GB/T818 M6 x 12mm $2.29
BLT806 Bolt with Washer M8 x 23mm for Sting, Sting R $2.29
BLT889 Bolt M5 x 12mm $2.29
BLT988 Bolt M8 x 20mm $2.29
BLT986 Bolt M6 x 16mm $2.29
BLT989 Bolt M8 x 16mm $2.29
BLT985 Bolt M6 x 50mm $2.29
BLTD052 Disc Bolt $2.29
SCRW099 Front Disc Bolt GB/T818 M5 x 10mm $2.29

Showing 24 of 148. 148 of these carry fitment confirmed against a specific model. Send us your model and year and we will confirm the rest before you order — check fitment by model →

Models we support

Talaria frame parts questions

Are Talaria frames interchangeable between models?: Generally no. Frames, mounts and pivot hardware differ across the range and between model years, and battery box dimensions differ too. Check fitment against your exact model and year before ordering anything structural.
How do I know if my frame bearings are worn?: Put the bike on a stand. Rock the forks fore and aft with the front brake on — knocking at the headstock means headset bearings. Grab the rear wheel and push side to side — movement at the swingarm means pivot bearings. Both are straightforward jobs.
Can a cracked frame be repaired?: We would not ride one. Aluminium frames can be welded, but heat changes the temper around the repair and these machines put real load through the swingarm pivot area. On a used bike, a welded frame is a reason to walk away rather than negotiate.